soundcore Liberty 4 Pro Review

We may earn a commission from some links on this page.

The soundcore Liberty 4 Pro is a pair of true-wireless earbuds built around adaptive noise cancelling. soundcore lists seven sensors, a charging case with its own display and touch bar, and dual dynamic drivers with a titanium-coated tweeter. The case is the unusual part: instead of hiding every control in an app, it shows the noise-cancelling level and lets you swipe through it. The sections below cover what the maker states about the noise cancelling, the sound, the case, the battery and the limits.

Key Takeaways

  • Adaptive noise cancelling: Seven sensors, with the level adjusted automatically about every 0.3 seconds.
  • Controls on the case: A touch bar and display on the charging case let you change noise-cancelling levels without the app.
  • Dual drivers: A 10.5mm driver plus a 4.6mm titanium-coated tweeter with a digital crossover.
  • Long playtime: Up to 10 hours on a charge and up to 40 hours with the case, and a five-minute charge gives four hours.
  • Water resistant: IPX5, so splashes and sweat are not a problem.

Adaptive Noise Cancelling

Noise cancelling on this model is adaptive. soundcore lists seven sensors that read noise from several directions, and the earbuds re-tune the reduction about every 0.3 seconds as the surroundings change. That suits a commute that moves between a quiet platform and a loud carriage, or an office that goes from silent to busy.

The maker rates the reduction at three times stronger than the earlier generation it compares against. The practical effect is a quieter background rather than total silence, which is worth knowing if you want to hear announcements.

For calls, six microphones and an AI algorithm work on voice isolation, with a wind-noise reduction step for outdoor use. soundcore lists multipoint connection, so the earbuds can stay paired to a phone and a laptop at the same time.

Sound and High-Res Audio

Inside each earbud are two drivers: a 10.5mm dynamic driver for the low end and a 4.6mm titanium-coated tweeter for detail, split by a digital crossover. soundcore calls the arrangement ACAA and lists a hi-fi tuning rather than a boosted bass curve.

The earbuds support LDAC, which the maker describes as carrying up to 990kbps, three times the data of a standard Bluetooth stream. That only matters with a source that supports LDAC and with the codec switched on in the app, and it is the feature that puts this pair in the same conversation as higher-priced models.

HearID 4.0 builds a personal EQ profile from a hearing test in the app, and the same app handles firmware updates and control customisation.

Charging Case With a Display

The case does more than store power. A small display and a touch bar on the case let you see and change the noise-cancelling level with a swipe, so a change does not need the phone. soundcore also lists the case as part of the 40-hour total playtime figure.

Charging is quick at the top end: five minutes in the case gives four hours of listening, which covers a forgotten charge before a commute.

Detailed Features

These are the figures soundcore publishes for the Liberty 4 Pro.

Feature What soundcore lists
Drivers 10.5mm and 4.6mm, titanium-coated tweeter
Noise cancelling Adaptive ANC 3.0, seven sensors
Playtime 10 hours, 40 hours with the case
Fast charge 5 minutes for 4 hours
Water resistance IPX5
Bluetooth 5.3, with multipoint
Codec LDAC up to 990kbps
Microphones Six, with AI call processing
Weight 5.5g per earbud

The pattern is a pair that covers the same ground as flagship earbuds: adaptive cancelling, a high-res codec, multipoint and a long playtime figure. The case display is the one feature that is genuinely different from most rivals, and it is the reason to pick this model over a cheaper pair in the same range.

Advantages and Disadvantages

Advantages

  • Adaptive noise cancelling that re-tunes itself as the surroundings change.
  • Noise levels can be changed from the case without opening the app.
  • Dual drivers with a dedicated tweeter for detail.
  • LDAC support and multipoint connection for two devices.
  • IPX5 water resistance and a quick five-minute top-up charge.

Disadvantages

  • The touch bar and display add bulk to the case compared with a plain one.
  • High-res audio needs a compatible source and the right codec setting.
  • Adaptive modes can be less predictable than a fixed level in steady noise.
  • Earbud fit still decides how much noise cancelling you actually get.

Concluding Thoughts

The soundcore Liberty 4 Pro targets buyers who want flagship-style features without the flagship price: adaptive cancelling, LDAC, multipoint and a long playtime figure are all on the list. The case display is a practical touch, since changing the noise level is the thing most people do most often.

If you only need basic cancelling and a long battery, a cheaper pair will do the job. If you want a high-res codec, two-device pairing and controls you can reach without your phone, this pair covers those points on paper.

Frequently Asked Questions

How Long Does the Battery Last?

soundcore lists up to 10 hours from one charge and up to 40 hours with the charging case. A five-minute charge gives about four hours of playtime.

Are They Water Resistant?

Yes. The earbuds are rated IPX5, which covers splashes and sweat but not swimming or full immersion.

Can They Connect to Two Devices?

Yes. Multipoint connection is listed, so the earbuds can stay paired to a phone and a computer at the same time.

Do They Support High-Res Audio?

They support LDAC, which soundcore describes as carrying up to 990kbps. The source device has to support LDAC too, and the codec has to be enabled in the app.

How Are the Noise Cancelling Levels Adjusted?

Two ways: automatically, with the earbuds re-tuning about every 0.3 seconds, or by hand on the charging case's touch bar and display, or in the app.